Residential Chain Link Fence Pro's and Con's
Written by Craig B

Fence Installation Costs 2022

Safeguard your property and enhance your home’s curb appeal in a single shot by having a new fence installed. The average cost for fence installation ranges from $1,667 to $4,075, with a national average of $2,871 in 2022.

From chain link to vinyl to picket, fences are a time and tested way to enhance a home’s curb appeal, corral pets and children, and discourages unwanted guests.

Fences can spruce up a property and increase a home’s value. Installing a fence could be more affordable than you expected, subject to the materials.  Fence installation costs between $13 to $50 per linear foot. Wooden fences less costly than metal fences, but a lot of homeowners enjoy a low-maintenance vinyl fence, also. Whether you’re thinking about installing a full-privacy fence or a classic white picket fence, below are the top factors to examine when having a fence installed.

Factors in Calculating Fence Installation Cost

Homeowners can anticipate materials and labor to each make up at least 50% of the total cost for fence installation, according to HomeAdvisor. The size of the area being fenced in is also going to impact the cost, so it’s a good idea to measure the area first. If the area being fenced is cluttered or there are the presence of rocks or roots in the ground, it could cost more to adequately dig holes for the fence posts. In a lot of areas, you are going to require a building permit or approval from your homeowner’s association.

Building Permits

A professional local fence installer is going to know if local building codes require a permit to install a fence. There could be restrictions concerning the fence’s height or the materials being used. Typically, a building permit cost around $400 to $800.

Labor

Fencing a property is a laborious project, so labor usually makes up 50% of the total cost. Labor rates differ based on the fencing material and how much work it will take for the installation of the fence posts. anticipate paying between $30 to $80 each hour for the building of a fence. A lot of professional fence installers can complete 150 to 200 linear feet in about 20 to 35 hours.

Fencing Materials

Whereas a wood fencing is a standard choice, vinyl is fast becoming a more favorable choice. Other options include chain link, wrought iron, aluminum, or steel. Installing a chain-link fence is the least expensive option at $17 per linear foot, whereas a wrought iron fence is more costly at $40+ per linear foot.

The Fence’s Location

It usually costs more for installing a fence in a rural area because the materials and laborers are required be transported from a different area. Many materials also cost more subject to the region. When a fence is located in an area that’s hard to reach, there may be added fees for location obstruction. Overgrown trees, narrow space, and parked vehicles can affect the ease of access.

Ground Condition and Trees

Occasionally, trees might need to be removed for fence installation, in which would be an additional expense. A considerable root system is going to slow down the digging of fence-post holes, in which increases labor expenses. The same holds true for rocky ground or present concrete. When bedrock is located at the post depth, additional equipment is going to be required for boring through it.

Additional Fence Costs and Considerations

  • Landscaping
  • Removal of Old Fencing
  • Gates and Posts
  • Utilities

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Fence Repair Costs 2022
Written by Craig B

Fence Repair Costs 2022

Surrounding many properties are typically fences. In addition to providing privacy and safety for your home and yard, they also serve as property boundaries. Additionally, they reduce noise from nearby neighbors and traffic. Numerous fences are designed to last for years, but accidents, storms, and normal wear and tear can cause them to deteriorate.

If this occurs, you should have a professional fix your fence. The average national cost to repair a fence is between $200 and $850, with the majority of households spending $500 to replace a broken fence panel. A worn picket can be repaired with sandpaper and basic repairs for a minimal cost of $100. The high cost of this project is $2,500 for substantial storm damage repairs.

Cost of Fence Repair per Foot

The cost of fence repairs depends on a number of variables, including the fence’s type, material, and size. The average homeowner pays between $10 and $50 per linear foot for expert repairs. However, many repair businesses have minimum service call prices and establish rates for specific types of repairs. They will therefore not always charge by the linear foot.

Material Cost to Repair a Fence

When fixing a fence, one of the most crucial items to consider is the fence material. Wood, wrought iron, aluminum, and barbed wire are all viable materials for the construction of fences. Some materials, such as vinyl, are less expensive and simpler to work with, but others, such as barbed wire, are more difficult and costly to repair or replace. The table below lists popular fence materials and their respective average repair costs.

Cost of Vinyl Fence Repair

The cost to repair a vinyl 1 fence is between $200 and $700. Vinyl is one of the least expensive and most popular fence materials. Vinyl is a generally durable material, but it is susceptible to damage from storms, accidents, and impacts, which can result in holes, cracks, and other issues. Additionally, it is normal for vinyl posts or sleeves to get broken and require resetting or repair.

Aluminum Fence Repair Cost

The typical cost to repair an aluminum fence ranges between $250 and $800. Aluminum is the least expensive sort of metal fence to install and maintain, but this fence is typically weaker and less resistant than other metals, such as wrought iron. Aluminum fence panels are susceptible to cracking, denting, and damage. A repairman may be able to weld the damaged piece, but it is more probable that he or she will unbolt, remove, and replace the afflicted panels or patch any minor warping and weathering damage.

Cost of Steel Fence Repair

The price range for repairing a steel fence is between $250 and $850. Steel is a durable, robust, and dependable material for fences, hence steel fences rarely experience excessive general wear and strain. However, sections may be damaged by storms or accidents, and it is routine practice to weld and repaint damaged sections.

Cost of Chain Link Fence Repair

Repairs to chain link fences typically cost between $300 and $600 on average. Popular, resilient, and robust, chain link fences can be used in any environment. They can also endure up to 25 years without significant issues. Common chain link fence repairs include resetting the posts, mending the top rails, and stretching new sections to replace damaged parts.

Price of Iron Fence Repair

Expect to spend between $300 and $1,000 when fixing a wrought iron fence. Installing and repairing wrought iron fencing is the most costly option for metal fencing. When storms or accidents cause severe damage to wrought iron, it must be welded. Since wrought iron fences typically feature decorative patterns and styles, the welding must be performed with care and precision.

Cost of Wood Fence Repair

$400 to $600 is the average cost to repair a wooden fence. Wood is one of the most aesthetically beautiful materials for a fence, as it is available in a variety of hues and grain patterns. Additionally, wood can be stained and painted in a variety of hues. However, wood fences require routine upkeep to prevent decay and insect damage. Exposure to the weather can cause significant deterioration over time, necessitating the replacement of portions or the realignment of posts if they begin to shift out of place.

Cost of Concrete Fence Repair

Expect to spend between $400 and $1,100 to repair a concrete fence. Concrete fences are uncommon on residential properties, yet they remain a favorite choice among certain homeowners because to their durability, solidity, and privacy and security benefits. Concrete is incredibly durable and is typically only broken by catastrophic incidents. When this occurs, new portions of concrete fence must be crafted and installed with care. It is also feasible to have concrete posts in a wooden fence, which may require epoxy 2 repair mortar in the event of damage.

Cost of Stone Fence Repair

Repairing a stone fence costs between $450 and $1,250 on average. Stone is one of the most durable materials for constructing a fence, although it can be damaged by severe storms and weathered over time. If the original stone pieces are damaged, it may be necessary to mortar 3 in new stone pieces.

Cost of Brick Fence Repair

Repairing a brick fence typically costs between $450 and $1,250 on average. Brick, like stone and concrete, is a very strong and durable material, and brick fences give beauty and sophistication to any home. Bricks withstand changing weather and temperatures well, but they can be damaged in accidents and must be re-laid and reset, which can be a laborious and time-consuming process.

Cost of Barbed Wire Fence Repair

The typical cost to repair a barbed wire fence is between $500 and $1,500. Designed for safety and security, barbed wire fences can persist for decades. Accidents, such as a tree branch falling on the wire and crushing a portion of it, or if the poles become rotted or broken may need its repair. Due of the delicate nature of the wire, barbed wire fence repairs might be more expensive than other types of fence repairs. Consequently, you may be obliged to pay a premium for labor due to the inherent danger and level of precision required by the procedure.

Cost of Fence Repair by Type of Fence

The type of fence also influences the cost of fence repair. There are different sorts of fences, including tall privacy fences and picket fences that are typically significantly shorter overall. Some fences can be repaired with less effort and fewer parts, resulting in lower overall expenses.

Cost of Temporary Fence Repair

Repairs to a temporary fence 4 can cost between $100 and $300. Temporary fencing may consist of wire mesh panels, plastic mesh panels, or straightforward metal obstacles. Before rebuilding or erecting a new fence, or while repairs or landscaping are being performed, these temporary fences may be utilized. Tears and other faults may develop in the mesh panels, but since this is a temporary fence, it may be wise to postpone repairs unless absolutely required.

Cost of Electric Fence Repair

On average, professional electric fence repair costs between $100 and $450. Wiring issues that may arise accidently while gardening or landscaping are the most typical issues with this fence. Typically, a specialist in electric fencing is required to resolve the issue and restore broken wires.

Cost of Picket Fence Repair

Between $100 and $500 should be budgeted for picket fence 5 repairs. Often, picket fences are quite short, so there is not much material and repairs are typically minor. They are typically made of wood, however vinyl and other materials can also be used. Due to environmental wear and use, picket fences may require repainting, staining, or repair.

Cost of Lattice Fence Repair

The typical cost to repair a lattice fence is between $250 and $850. This is one of the more ornamental fences, and it can be constructed from vinyl, wood, or metal, among other materials. The unusual pattern of lattice fences allows plants to climb up and around them. Depending on the material, lattice fences may have water damage, rot, dents, or cracks in specific pieces, which must be repaired with care to maintain their pattern and design.

Cost of Split Rail Fence Repair

Expect to spend between $300 and $600 to fix a split rail fence. 6. A split rail fence, also known as a post and rail fence, is a basic and straightforward wooden fence typically found on ranches and agricultural land. Being composed of simple posts and a few rails strung between them, they are useful for covering huge areas of land and for constructing animal enclosures. Pest and water damage may cause problems with the posts and rails over time.

Cost of Shadowbox Fence Repair

Homeowners pay an average of $350 to $700 for shadowbox fence maintenance. A shadowbox fence is a distinctive wooden fence that resembles a picket fence but is considerably taller and has boards that alternate on either side of the rail. As these fences are often constructed from wood, they are susceptible to regular wood problems such as decay and insect infestations.

Cost of Stockade Fence Repair

A stockade fence repair will cost between $350 and $700. A stockade fence consists of close-fitting, side-by-side hardwood planks with no spaces in between. Stockade fences are available in a variety of woods, including spruce and cedar, and they provide adequate privacy. However, similar to other timber fences, they are susceptible to decay and insect damage.

Cost of Privacy Fence Repair

Repairing a privacy fence 7 costs between $400 and $1,250 on average. Typically the largest and tallest fences, privacy fences can be constructed from a variety of materials, including wood, metal, brick, and stone. The fencing material has a significant impact on the ultimate cost, although repairs to privacy fences are typically more labor-intensive and costly due to their size.

Price of Fence Repairs by Type of Repair

Your fence may develop numerous problems over time. Damaged posts, panels, and gates are among the most typical concerns requiring repair. However, your fence may also require repainting, staining, or reinforcement. The table below displays common repair types and their respective average costs.

Cost of Fence Charger Repair

Between $100 and $250 is what homeowners pay for professional electric fence charger repairs. The charger delivers power to the wires of your electric fence, but if it is damaged in any way, problems may emerge. Normal operation may require rewiring, resetting, or altering in some fashion.

Cost of Fence Picket Repair

On average, repairing pickets costs between $100 and $300. Similar to other fence components, pickets can become damaged in a number of ways. They may crack, chip, or develop holes as a result of strikes, storms, or accidents. The material of the pickets affects the price, as wooden pickets are typically less expensive to repair than metal ones.

Cost of Fence Post Repair

Repair costs for a fence post 8 range between $150 and $400. Common fence post issues include tilting and shakiness, which may be caused by faulty installation or soil disturbances. Additionally, they are susceptible to decay, water damage, and termite infestations. They may require resetting or reinforcement to stand upright.

Cost of Fence Panel Repair

On average, professional fence panel repairs cost between $150 and $400. Storms and strong winds frequently cause fence panels to fall, so they may need to be relocated and fastened back into place. In addition, it is usual for panels to have holes and cracks that require filling and patching.

Cost of Fence Gate Repair

Between $150 and $500 is what homeowners pay for gate repairs. The price largely relies on the size and material of the gate. A wooden gate that only requires a small hole to be patched with putty is less expensive to repair than a wrought-iron gate that must be welded back into shape.

Cost of Fence Reinforcement

The cost of reinforcing an existing fence ranges from $200 to $600, depending on the method used and quantity of labor necessary. Wind-resistant fences can be strengthened in a variety of ways, such as by screwing additional wood pieces along the rails or putting concrete around the base of the posts to lock them in place.

Cost of Fence Staining

The cost to stain a fence ranges between $1,000 and $3,000 on average. This is an effective method for revitalizing the appearance of wooden fences. This also creates a barrier against the panels, rails, and posts being damaged by dampness. This can be essential for persons who live in regions with high rainfall or humidity.

Cost of Fence Painting

The average cost to paint a fence ranges from $1,000 and $4,000, depending on its size. Painting a fence is a great method to revitalize it and conceal blemishes and stains. It is also an effective means of protecting wooden fences against the elements and extending their lifespan.

Price of Fence Repair by Type of Replacement

In some instances, your fence’s components may be irreparable. For instance, if a post has deteriorated due to rot or a panel has been shattered by a falling tree branch, repairs are typically not possible and these components must be removed and replaced. Replacement of components is typically more expensive due to higher material costs. Below is a table containing examples of popular fence replacements.

Replace Fencing Boards

Replacement of fence pickets costs between $150 and $350. Pickets are available in a variety of materials, including as vinyl, wood, and metal. Vinyl pickets are typically far less expensive than metal pickets, therefore the material used affects the price. Additionally, it is typically more difficult to repair metal pickets because they may need to be welded into place.

Replacement Transformer for Electric Fence

Installing a new transformer for your electric fence costs between $150 and $350. The pricing largely depends on the type of transformer you require. Installation is simple and may be completed in less than an hour, but material costs vary based on the transformer’s required strength.

Pool Fence Replacement Mesh

The cost to replace the mesh in a pool fence ranges between $200 and $400. Numerous pool fences are constructed using basic vinyl mesh to allow light to pass through while maintaining a barrier. If someone or something falls into the mesh, it may become damaged or ripped. Replacement is the recommended line of action when this occurs.

Fence Post Replacement Cost

To replace a fence post will cost between $200 and $500. If fence posts are severely damaged due to rot, storm damage, accidents, or termites, they may need to be replaced. When the damage is too severe to be repaired, contractors typically advise replacement.

Price of Replacing Fence Panels

Replacement fence panels cost from $200 and $750, primarily dependent on the panel’s type, material, and size. A basic vinyl panel is significantly less expensive to replace than an intricately crafted section of wrought iron fence. Typically, fence panels are only required to be changed if they sustain severe damage.

Cost of Fence Gate Replacement

Depending on the style of gate, the average cost to replace a fence gate ranges from $200 to $800. If you have a straightforward wooden gate, the material costs and installation time should be low. The price of a huge ornate wrought iron gate might be significantly greater.

Cost to Repair a Fence by Problem Type

Numerous problems may emerge with your fence, and the cost of repairs will vary depending on the nature of the issue. Compared to fixing a fence ravaged by a severe storm, mending a small hole is both less expensive and less difficult. The chart below details common fence issues and the average cost to repair them.

Damage to a Fence

The cost to repair a hole in your fence ranges from $100 to $400, depending on the size of the hole and the fencing type. Wooden fences with small cracks can be fixed with putty and sanded to appear brand new. However, larger holes in more costly fences, such as brick fences, may require additional materials and labor to fix.

Repair Loose Fence Post

Repairing a wobbly fence post costs between $150 and $500. Posts may be loose or unsteady as a result of faulty installation or, potentially, weakness or damage at the base. If your post is still solid and unbroken, a professional may need to dig around it and reset it in a stable, upright position. If it has been damaged by rot or insects, it may need to be completely replaced.

Repair of Cracked Fence Posts

Cracked fence posts cost between $150 and $500 to fix for homeowners. Numerous factors, such as storm damage, strong impacts, and weathering, can cause cracks in posts. If your post is built of concrete, the damaged area may be possible to be patched or coated with glue or mortar. In other circumstances, a replacement may be necessary.

Cost of Leaning Fence Repair
The typical cost to repair a leaning fence is between $200 and $800. Typically, sagging fences are the result of faulty installation or post deterioration. In more severe cases, however, decay or pest infestations may be the cause of a leaning fence. Since parts must be removed and replaced, this might be a more expensive repair operation.

Rusty Fencing

The cost to repair a rusting fence ranges from $250 to $1,000. Rust can be a problem for chain link and wrought iron fences. Excessive exposure to moisture and the elements causes it. Due to the high saline levels in the air, people who live near the beach may see rusted fences more frequently. In some instances, rusty areas can be polished or treated with a neutralizer before being painted. In other instances, if the rust is extensive and severe, pieces must be replaced.

Corroded Fence

Depending on the extent of the damage, fence rot repairs run from $300 to $1,000. Rot develops in wooden fences owing to excessive moisture, and it is usual for the bases of wooden posts to rot since they are constantly in contact with the soil, exposing them to a great deal of moisture. In rare circumstances, rotting sections can be removed and the remainder of the structure can remain intact, but sometimes, rotted areas must be completely replaced.

Storm Damage Restoration
The cost to repair storm damage to your fence is between $300 and $2,500, depending on the amount of the damage. Some storms can wreak havoc on fences. For instance, tree branches can fall and damage entire portions, or large objects can be blown into the panels and knock them down. Alternatively, if your fence is sturdy and fortified, the damage may be modest and can be repaired with simple patching and new screws or nails in the affected sections.

Cost of Repairing a Fence

Fence repair labor expenses range from $50 to $200 per hour. A handyman may price towards the bottom of this range, whereas fence repair specialists may charge more. Many repair workers have minimum fees or call-out rates between $75 and $100, but if you employ them to fix your fence, these expenses may be waived. Variable time is required to repair fences. Some tasks, like as fixing holes or replacing a few boards or pickets, can be completed quickly, whereas repainting, staining, or reinforcing big portions can take many hours.

 

Fence Repair Expenses by Location

The location of your fence may also effect the cost of fence repair. There are fences in numerous locations on a home, including the front yard, backyard, decks, and pool areas. The chart below lists frequent areas where you might locate a fence, as well as the average repair expenses for each of these common locations.

Cost of Pool Fence Repair

$200 to $850 is the average cost of fixing a pool fence. Pool fences are typically made of chain link, vinyl, or metal, and they are not typically extremely large or intricately designed, thus they are frequently among the least expensive to repair. Typical difficulties with a pool fence include fading, cracks, and dents caused by accidents.

Cost of Deck Fence Repair

A deck fence repair could cost between $200 and $850. Commonly, deck fences are made of wood to match the rest of the deck, but vinyl or metal deck fences are also available. Common problems with these fences include rust, water damage, and breaks caused by deck mishaps.

Cost of Balcony Fence Repair

A balcony repair typically costs between $200 and $1,000. Typically, balcony fences are tiny, reducing repair costs. Due to their elevated placements, they are unlikely to encounter too many difficulties. However, they can be destroyed by storms, and many people have metal balcony fences that must be welded when they are broken. Additionally, certain balcony fences may be difficult to access, hence increasing the labor costs associated with repairs.

Cost of Backyard Fence Repair

The average cost to repair a backyard fence ranges from $200 to $1,250, depending on the material of the fence. The variety of backyard fences is vast, ranging from inexpensive and simple vinyl fences to elaborate wrought iron fences and concrete privacy fences. Numerous problems may emerge with them, such as rotted timber supports and broken metal panels.

Cost of Front Yard Fence Repair

Expect to spend between $200 and $1,250 on repairs to your front yard fence. Like backyard fences, front yard fences come in a variety of styles, heights, and materials, from picket fences made of wood to tall masonry walls with wrought iron gates. Materials and type of repair are the primary determinants of repair costs.

Reasons for Fence Repair

There are numerous reasons to repair a fence, and fences experience a variety of challenges throughout time. Broken panels, tilting or shaky poles, and falling panels are among the most serious issues. Also, storms frequently damage fences. Large cracks and holes in parts of a fence should be repaired, and if you find symptoms of decay or termite damage in a wooden fence, immediate repairs are necessary. Additionally, missing boards and pickets must be replaced.

Emergency Fence Maintenance

There may be occasions when emergency fence repairs are necessary. Examples include panels falling over or a broken transformer or damaged wires on an electric fence for animals. Numerous repair firms and independent contractors offer same-day emergency repair services for an additional $100 to $200.

Fence Maintenance

There are numerous ways for homeowners to maintain their fences in order to avoid costly repairs and replacements. For instance, it is recommended to regularly inspect your fence for signs of damage.

Examine the posts and panels for cracks, rot, water damage, dents, and breaks, and if you discover any, take immediate action. The longer you wait, the worse problems might grow, particularly water and insect damage.

Additionally, it is prudent to often clean your fence with a pressure washer to prevent dirt from accumulating and deteriorating the components. However, if you have a wooden fence, be careful with the settings because too much water or pressure could harm it.

Examine the vegetation surrounding your fence and cut any bushes or trees that are too close and could cause harm during a storm. Also, remove large and heavy objects from your yard and outdoor areas before a storm to prevent them from being blown into your fence.

Compared to Fence Replacement

When faced with expensive fence repairs, many homeowners waver between repairing or replacing their fence. Weigh the costs and benefits of each option. If your fence is old, broken, and requires frequent costly repairs, it may be more economical to replace it. It costs between $1,500 and $10,000 to replace a fence, depending on its size, location, and materials.

Typically, fences survive between 10 and 20 years, depending on the material. Therefore, if your current fence is at least 10 years old, it may be time to replace it. However, with proper upkeep and care, fences can last for many years. It may not be necessary to replace your fence if it is still in good shape and requires only minor repairs.

Costs of Enhancement and Improvement

Power-Wash a Fence

Between $125 and $235 is the price range for pressure washing a fence. This is an effective method for revitalizing an old fence, since it swiftly removes years of filth and grime. Before staining or sealing fences, it is also prudent to clean them with pressure.

Enhance the Wind Resistance of a Fence

If your region is prone to heavy winds, it may be prudent to invest in a wind-resistant fence. You can spend an additional $10 to $25 per linear foot for this fence, or you can pay $200 to $500 for reinforcement services to enhance the wind resistance of your existing fence.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Using A Chalk Line For Fence Installation
Written by Craig B

Using A Chalk Line For Fence Installation

In order for fence panels and rails to fit correctly between fence posts, fence posts must be perfectly aligned along a fence line. Using a chalk line permits the creation of a perfectly straight line and leaves a trace of chalk on the ground or other surface. It is nearly impossible to install wooden fence posts so that the fence tops are all at the same height. Typically, the height of the fence posts must be cut to provide a tidy appearance. Marking the required height of the posts using a chalk line eliminates the need to measure each individual post.

Identifying Fence Rows

  1. At each corner where you desire to erect a fence, drive a 12-inch wooden stake into the earth. Use a rubber mallet to drive the stakes into the ground approximately 6 inches deep. If you are installing a fence on a hard surface, such as around a concrete patio, use wooden blocks instead of wooden posts to mark the corners.

 

 

2. Working with two adjacent stakes or blocks, pull a chalk line taut between the stakes or blocks. You can either affix the chalk line to the stakes or have assistance hold it tightly against the stakes or blocks.

 

3. Pull the chalk line thread up and let it go. Snap the string multiple times and in multiple locations along the line until you can see the thin chalk line on the surface beneath. On hard surfaces such as concrete, gravel, and even bare soil, chalk is far more visible than on grass. Therefore, expect to break the line multiple times on grass.

4. Immediately spray landscaping spray paint over the chalk line drawn on the ground or other surface. Paint increases the visibility of the line, especially on grass. Mark each fence post’s location with a spray-painted “X” after determining the distance between them. Install the fence posts at each X and the fence panels in between the fence posts.

Identifying Post Height

  1. Mark the desired height on the end and corner fence posts with a pencil after measuring them to the desired height. The markings must be placed at the same height on each post.

2. Pull a chalk line string taut between two corner or end posts, ensuring that the string contacts the front of all fence posts. Recruit individuals to hold the line in place at both ends.

3. Snap the chalk line string multiple times along the fence’s length, leaving a dark mark on each post.

4. Utilizing the chalk line as a reference, draw a straight line on the remaining edges of each fence post. Utilize a speed square to guarantee accurate lines.

5. Using a circular saw, trim the top of each fence post along the designated lines. A circular saw can only penetrate a post approximately 2 1/2 inches deep. Therefore, cut as deeply as feasible on one side of a post, reposition the saw on the opposite side of the post, and cut the remainder of the post through.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Written by Craig B

How To Install Wrought Iron Fence Into Concrete

Wrought iron fencing gives a robust, beautiful accent to a yard while also serving a purpose, such as pet containment. You can use it as a yard border or to spruce up an otherwise uninteresting location. In some instances, fencing is constructed to create an enclosed environment around a concrete porch. If you are installing an iron fence on top of concrete, you will need to use special anchoring hardware.

1. Determine the perimeter of the concrete surface and indicate the intended post locations.

2. Mark the location of the holes on the welded plate located at the bottom end of the fence post. Use a pencil to mark the concrete through the perforations.

3. Remove the post and use a power drill and masonry bit to drill the hole locations. Drill to a depth at which your concrete anchors will fit.

4. Place the post back in position and insert the anchor’s fastener through the holes and into the concrete. After driving fasteners into all holes of the post, insert the concrete anchor’s bolt onto each fastener and tighten it. Use a wrench to tighten it completely.

5. Drill a hole in the concrete where the gate posts will go. Utilize a specific core drill capable of drilling into concrete without completely penetrating the material.

6. Apply an epoxy concrete to the hole. Follow the directions provided by the manufacturer for mixing the epoxy. After filling the hole, insert the post. Adjust the post so that it is perpendicular to the concrete using a level.

7. Stabilize the post by bracing the post’s four sides with something like wooden boards. When the instructions state that the epoxy should be dry, remove the bracing.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Using A Chalk Line For Fence Installation
Written by Craig B

Wrought Iron Fence Installation

Installing wrought iron fences requires some effort, tools, and knowledge, and we’ll show you how to do it in this piece. It may be a great weekend DIY project! Continue reading to find out more!

Examining the Building Codes

Building codes may apply in some areas, governing the type, placement, and height of fencing. This is especially true if you live in a homeowners’ association. This forethought could save you a lot of trouble in the future.

Planning and Measuring

The next step is to pick where your new fence will go, how tall it will be, and what design you want it to be. This is a great opportunity to get underground utility lines marked so your post holes don’t end up in the wrong spot.

Obtaining Materials and Equipment

To build a wrought iron fence, you’ll need various materials in addition to the posts, panels, and gates. Fasteners, post hole diggers, shovels, a level, tape measure, stakes, twine, screwdrivers, wheelbarrow, gravel, and fast setting concrete are among the tools needed.

Using Stakes to Create an Outline

Set pegs to help you check your new fence’s dimensions and angles are correct. Place the stakes at the corners and where the path changes. Wrap and tightly stretch your string around each of these stakes to illustrate where the fence will go.

Post Hole Digging

Post holes should be dug at corners, on both sides of fence panels, and at the ends of fence panels. The majority of post holes should be 2 feet deep and 6 inches wide. Fill the bottom of the post holes with about 2 inches of gravel before adding your quick set concrete. Mix your concrete in your wheelbarrow once you’ve dug all of your post holes. Make sure your concrete isn’t too damp because it’ll help keep your posts straight in the holes.

Fence Post Installation

Place the post in the post hole first. After that, fill the hole with concrete. When the concrete is about 4 inches from the top of the hole, stop pouring. After that, a worker uses a level to confirm that all of the posts are straight and in accordance with the rest of the fencing. The top 4 inches of the hole are filled loosely with earth once the posts are straight and the concrete is holding them up. After the concrete has cured for about a week, you may begin attaching your wrought iron panels.

Putting Up Panels

Wrought iron fencing is made up of panels that fit into the posts you’ve already put. Screws or bolts are used to secure the panels to the posts. Attach the top bracket first, then the lower bracket, after aligning the panel brackets with the posts. Carry out the same procedure for all of the fence panels.

Hanging Gates

Hanging your wrought iron gate is the final step in installing your wrought iron fence. The majority of the time, this will be a pedestrian-only gate. If it’s a driveway gate, you’ll almost certainly need the assistance of expert installers to get it put properly. This is particularly true if you’re installing a motorized automated gate.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Written by Craig B

Painting Wrought Iron

Preparation

Failure to clean thoroughly prior can result in problems due to underlying rust. Begin by removing the larger chunks of rust and flaking paint from the fence with a wire brush. Sand the railing with medium-grit sandpaper to remove the remaining peeling paint. This also contributes to the creation of a good rough surface. After that, sweep the area and use soapy water to clean the railings. You can start setting up tarps and dropcloths, as well as attaching tape around the bottoms of the railing, after drying the metal with a clean, dry rag. Apply a rust-inhibitive primer now that your surface is ready. Allow one to three hours for the primer to dry after applying an even layer.

Painting

Begin applying exterior rust-inhibitive enamel paint once the surface is totally dry. Try to avoid using a single heavy coat of paint. Instead, use many light layers to get a more equal finish and avoid bubbling and subsequent flaking. A more typical color choice is black paint, however brighter metallic colors can provide a fascinating contrast to the surroundings. The most common finish is semi-gloss or gloss, but you can also choose with a flat or satin finish.

Preventing Rust

Metallic surfaces are more prone to rusting and chipping, especially when exposed to the elements. Fortunately, homeowners can take efforts to minimize the damage by taking preventative measures. Wrought iron fences should be washed twice a year with soapy water. Annually, clean the railings with a mixture of lemon juice and white vinegar, then buff any scratches or rust marks with steel wool. It’s possible that you’ll need to touch up a few spots with matching paint. You can also apply a coat of auto wax once it dries to help seal the rails against moisture. Iron railings rarely need to be sanded and repainted more than once every six years if they are properly maintained.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Does Pine Make Good Fencing Material?
Written by Craig B

Cedar Vs. Pine Fencing

Both cedar and pine provide unique advantages. The following are comparisons between the two materials.

Concerning Pressure-Treated Pine

Pine fencing is preferred since it is less expensive. The pine fencing has been “pressure-treated” to resist weather damage, mildew, fungi, and general wood rot. However, even with the addition of chemical preservatives, they often do not outlast a cedar fence.

Upkeep of a Pine Fence

A pine fence requires routine maintenance to remain in good shape. It will require periodic staining or repainting. Additionally, it is necessary to clean the fence annually and replace any rotten boards. To assist a pine fence withstand the elements, it must also be regularly sealed.

The Pluses and Minuses of Pine Fencing

The pricing is the key quality of pine fencing. It is typically the least expensive material available and can assist reduce initial expenses. Additionally, pine fencing makes for good fence posts. The same pressure treatment that makes it weather-resistant also protects it in the ground.

As with nearly anything else, modest up-front expenditures might be accompanied by numerous undesirable long-term attributes. True regarding pine fencing. Due to the chemicals used in the treatment process, this type of fencing is susceptible to fading and may have a greenish hue. Pine fences have durability difficulties as well. They can easily warp and buckle and are susceptible to weather and insects. In just a few years, your new fence can begin to resemble an old one.

With the substantial expense of a new fence, you want it to be durable. Pine fences typically last half as long as their cedar counterparts. In addition, the pressure-treatment technique leaves the wood contaminated with harsh chemicals such as arsenic.

Pros and Cons of Cedar Fencing

Cedar fencing represents the pinnacle of fencing materials. If you want a fence that is both durable and attractive, cedar is the perfect material for a new fence.

Due to its inherent resistance, cedar wood does not require treatment. It retains its naturally appealing hue without the use of harmful chemicals. However, it does require some care. However, this is easily remedied with soap and water and some elbow work. Nothing compares to the staining, sealing, and frequent replacing of fence boards that a pine fence requires.

The sole disadvantage of cedar fencing is its initial expense. However, cedar fencing is a worthwhile investment in the long run. A cedar fence can endure twice as long as a pine fence while retaining a more attractive appearance. Additionally, it does not warp or buckle as easily and requires less upkeep.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Written by Craig B

Wood Vs Vinyl Fencing

Both vinyl and wood provide unique advantages. The following are comparisons between the two materials.

Appearance

Wood and vinyl come in a variety of forms and designs, depending on your budget and the sort of wood you purchase. Many believe that wood gives a home a classic, conventional appearance. Consequently, vinyl maintains its appearance longer and degrades less rapidly.

Choices and Variation

Vinyl and wooden fences are both available in a number of styles. With wood, there are over a dozen popular options available (cedar, oak, cypress, and bamboo, just to name a few). Vinyl is an inexpensive sort of plastic that comes in a variety of designs and colors to satisfy your privacy requirements. There may even be vinyl materials that resemble your preferred wood.

Cost

The price of erecting a new fence is relatively low. The installation of a vinyl fence is less expensive than that of a wooden fence, but wood is a cheaper material overall. Wood costs between $2 and $10 each fence, but vinyl costs between $2 and $6 per picket.

Preservation and Cleaning

Vinyl requires less maintenance than wood. You can clean your fence with soapy water to remove grit and dirt buildup, and you don’t have to worry about material being lodged between the pickets or in the grooves. However, vinyl appears dirtier than wood more quickly.

Simple Installation

It will cost around the same to hire a professional fencer regardless of the material you choose; $30 to $80 per hour is typical. A vinyl fence is quicker to install than a wooden fence, which could reduce your installation expenses. Vinyl is far simpler to install for people who like to do it themselves.

Privacy

Both vinyl and wood are good for containing backyard living spaces. Wood can distort over time, producing cracks that allow outsiders to look inside. Vinyl will not warp, but it is more prone to weather-related damage.

Duration of Life

Vinyl is the best material for durability. With proper maintenance, a vinyl fence can last a century. A wooden fence can last up to twenty years.

Painting and Coatings

Today, vinyl fences that resemble wood offer both the aesthetic of wood and the durability of plastic. However, you cannot paint over it, so what you order is what you will receive. If you desire to alter the appearance of your yard, you may easily repair or paint wood with a new color.

Replacements and Maintenance

Both vinyl and wood fences are uncomplicated to repair, although wood fences are more likely to require it. You can easily get a new picket from the store and install it yourself.

Property Worth

A home’s attractive fence is a big selling element. Vinyl and wood will both boost the value of your home if they are properly maintained. Some homeowners choose a traditional wood appearance, which may increase return on investment.

Wood versus Vinyl Fencing: Which Is Best For Your Home?

Taking into account the sort of home you own, your location, and the reason you’re choosing between vinyl and wood will help you select the appropriate material.

Which is optimal for homes with children?

When constructing a fence, vinyl and wood are both excellent options for homes with children. Over time, wood can warp, making it easier for outsiders to look into your yard. Additionally, older wooden fences can generate splinters, which can be a problem if you have young children. With children present, a vinyl fence may be the best option for safety and privacy.

Which is ideal for pet-friendly homes?

Wooden fences can isolate your home from the street, which may be advantageous if your dog howls or growls at passersby. Vinyl is also a viable choice, but you must ensure that the pickets are close enough together, especially if your dog is an expert escape artist.

Wood against vinyl versus composite

Typically, composite fence prices between between wood and vinyl. Made from recycled plastic and wood, it resembles a traditional wooden fence while providing some of the advantages of vinyl. If you want a hardwood fence for aesthetic reasons but are strongly considering vinyl fencing, composite fencing is another choice to consider.

Wood versus Vinyl versus Chain-link Fence

Chain-link fences are another inexpensive choice, although they lack the exterior charm of wood and vinyl fences. Additionally, they offer little privacy, so you should consider this before installing it. The key advantage chain link fencing has over vinyl and wood is its nearly nonexistent maintenance requirements. After installation, relatively little additional labor is required.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Residential Chain Link Fence Pro's and Con's
Written by Craig B

Popular Fence Options In Arizona

Read on to learn about popular fence options in Arizona!

Chain-Link Fencing

The majority of individuals shudder when we suggest chain link fences as a potential choice. There are several features of chain link fences that may appeal to you. You may choose a vinyl-covered fence for a more refined and cost-effective appearance. White, green, brown, orange, and red are your options. You can obtain any hue on the planet through customizing. A vinyl chain link fence allows consumers to secure their property in a manner that complements the surrounding environment. Keep in mind that the diamond size can also be customized. Chain link fences with larger diamonds are weaker than those with smaller diamonds.

Fencing Made of Wrought Iron

Modern wrought iron fences are resistant to rust, chipping, flaking, staining, and chalking. Phoenix Block Wall Service procures fence from reputable producers. They add a rust inhibitor to the top coat to preserve the fence’s aesthetic and durability. Galvanized iron is used to provide additional protection from the elements. The scorching heat of Arizona will destroy any paint job. Because of this, we exclusively select iron containing UV inhibitors. This characteristic prevents chalking, discoloration, and flaking. When you combine a good wrought iron gate with a well sculpted bloc fence, you have a stunning, long-lasting fence.

Plastic Fencing

Vinyl is prized for its longevity, low care requirements, and natural appearance. There is nothing quite like a wood fence, but they demand more maintenance than anticipated and dry out rapidly in the Arizona heat. The appearance of vinyl fencing is meant to resemble that of cedar, plywood, and birch. Vinyl’s variety of options is a feature that our customers appreciate. You can choose the grain design and color. The boards are treated with a UV inhibitor to ensure that their color remains consistent for many years. The combination of a vinyl gate and block fencing can produce a lovely result. Vinyl fencing helps increase the aesthetic appeal of your property.

Cypress Fencing.

Nothing compares to a cedar fence. The initial scent is enticing. Some of our clients avoid cedar as a fencing material. In actuality, if you maintain a cedar fence properly, it will outlive the house it is supposed to protect. We suggest that you treat your fence every two years. If you lack the time to maintain your fence, our team of professionals can do it for you. In fact, you may lose track of time, but our unique servicing program will inform us when it is time to re-stain and seal your cedar fence.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

Residential Chain Link Fence Pro's and Con's
Written by Craig B

What Fence Material Is The Longest Lasting?

With the variety of fence materials currently available, you may feel overwhelmed by your selections. When comparing wood fences, vinyl fences, wrought iron fences, and others, it is essential to consider durability. This will assist you in locating the optimal investment for your short- and long-term objectives. Find out which fencing material is the most durable by reading on.

Different Fence Materials (And How Long They Last)

There are a variety of fencing materials available on the market today. The following is a summary of the most prevalent fencing materials:

Wooden fencing is among the most common solutions, independent of a home’s architectural type or area. Depending on the type of wood it is manufactured from and how well it is maintained, a wooden fence can last 30 years or longer. Less costly woods, such as spruce or pine, are not as durable as cedar. A fence that is tinted on a regular basis will endure longer than one that is left untreated.

Chain link fencing is one of the most cost-effective fencing materials available. Depending on maintenance, chain link fencing can last roughly 20 years. However, chain link is not as visually appealing as other fence materials, making it inappropriate for many settings.

Vinyl fencing: Vinyl fencing may last more than 30 years with minimal upkeep. Vinyl, unlike wood, which can bend, rot, or shrink with time, is solid and resilient. It is resistant to insects, rain, snow, fluctuations in temperature, and other elements. Therefore, vinyl fencing is the most durable fencing material. It requires no staining and is simple to clean with soap and water. Vinyl fencing is the best fencing material available.

Aluminum, steel, and wrought iron fencing are sturdy and appealing decorative solutions. These fences can endure high winds and severe precipitation. However, they offer little seclusion, thus they may not be suitable for a backyard or other personal space. We can assist you in deciding which fencing material is ideal.

Other Factors Influencing Fence Durability

In addition to fence material, there are additional aspects that affect the longevity of your fence. For example, if your home is situated in an open area with considerable wind exposure, the wind will exert additional force on your fencing. This may lead the fence to lean over time if it is not properly anchored into the ground. If you have a lot of hydrostatic pressure and standing water in your yard, the foundation under your fencing may be compromised. This could also reduce the longevity. Discuss these variables with your fence installers to ensure that you select the ideal fence design for your needs.

How to Increase the Durability of Your Fence

If you want your new fence to survive as long as possible, consider the following advice from our fencing company in Baltimore.

Keep an eye out for trees and bushes along the fence line. If you observe any undesirable plants developing, uproot or eradicate them as soon as possible. Over time, the root structures and branches can exert detrimental pressure on your fence.

Remove leaves and other debris from the fence’s foundation. This trash provides a warm and pleasant habitat for bugs that could cause harm to your fencing.

Your wooden fence should be stained. This procedure must be performed every few years. The stain will protect the wood from the elements and keep the fencing’s aesthetic appeal.

Repair the fence in a timely manner. The problems will worsen over time, resulting in more expensive repairs. Any damage to your fence could compromise its structural integrity.

Multiple times a year, inspect your fencing. Many fence defects are simple to fix, particularly if they are caught early. A few times per year, perform a brief inspection to ensure that your fence is in good condition. If not, please contact us for fence repair.

Residential and Commercial Fencing Mesa | Construction – Special Events – 24 Hour Emergency Fencing Phoenix

1 2 3 4 5 6